Инструкция пользователя скутер honda lead

инструкция пользователя скутер honda lead
Clean the operation. battery terminals if they become dirty or corroded. Have your scooter inspected by 2. Hold your scooter in an upright position. Torque: 24 N·m (2.4 kgf·m, 18 lbf·ft) 13. Fill the crankcase with the recommended oil ( P. Page 73 If the coolant level is dropping noticeably or the reserve tank is empty, you likely have a 1. Place your scooter on a firm, level surface. serious leak. Page 30: Idling Stop System • Push the Idling Stop switch to IDLING STOP. Idling Stop System Operating Con- ditions Ride the scooter at speed over 10 km/h (6 Followings are requirements for the Idling mph), to enable the Idling Stop system under Stop system to operate properly. Switches the electrical system on/off, locks the steering, and operates the OPENER Operates the fuel lid and seat opener switch. fuel lid and seat opener switch.


License light cover 1. Page 97 Fuse box cover Main fuse 2 4. Close the fuse box cover. When you leave the scooter, always turn the ignition switch to off. Socket Bulb… Page 94 Electrical Trouble Burned-out Light Bulb ❙ Brake/Tail Light Bulb Prongs Screws Prongs Rear cover Prong Socket Prongs 2. While the rear cover pressing as illustration, unhook the prongs, from the front side of the rear cover. 3. Remove the rear cover. Page 88 Engine Does Not Stop by the If the throttle is not closed completely: Close the throttle completely.

Idling Stop system: (P27) Start button Turn signal switch Pressing the switch turns the turn signal off. Page 107 You & the Environment drain or on the ground. Page 48 : Inspect (clean, adjust, lubricate, or replace, if necessary) Procedures are provided in an official Honda Shop Manual. : Replace : Technical. In the interest of safety, have your scooter serviced : Clean by your dealer.

Похожие записи: